Nokia have just released a new update of the N800 firmware with a fix for a MMC/SD corruption bug. This was discussed quite a bit in the comments to my last N800 post, so I know a lot of people are glad to see it sorted out. As soon as the new kernel source is […]
I managed to find a few minutes and put together the promised patch series for the latest n800 firmware. This series adds support for MMC 4.x wide-bus support and restores 48MHz highspeed support. I did some basic testing with my n800 and confirmed that transfer speeds are now back to what they were with my […]
As promised last weekend, here are the results of my investigations into the latest kernel in the 2007.26-8 kernel. As I previously observed, the transfer speed is capped at 24MHz even though the device is capable of operating at 48MHz. This cuts the maximum transfer rate of high-speed SD and MMC cards. Apparently this was […]
I’ve been on holiday for the last week and a half, so I missed the firmware update while I was away, but I’m sure most of you are aware that a new firmware for the n800 is out and that is includes SDHC support. This means that you don’t need a custom kernel with my […]
Unsurprisingly, people have been pretty anxious to get an updated SDHC enabled kernel for the latest n800 firmware release…
Since my last post with my updated n800 kernel, I’ve spent some time looking at a troublesome MMC card – it’s a Transcend 4GB MMCplus card…
Alright then. As promised earlier, I’ve got a pre-built replacement kernel for the n800 which adds support for MMC 4 and SDHC cards.
Well, that didn’t take too long. I’ve tagged and released Maemo Weather 0.7 with support for Maemo 2.0/IT2006…
Kalle made a very good point about the problems with the two pane view; I have what I hope is a better idea that still avoids additional dialogs.
Haven’t posted an update in a while, and haven’t written about my gweather work in an even longer time. Over the last few weeks, as time allowed, I’ve been implementing a proper interface for gweather on the 770.